

Shaped cans small
Machines

SFM1/11
The series of SFM stretch forming machines has been developed for stretch forming can bodies to meet the steadily increasing demands for higher output. The machine is based on the same principle as the well known and proven types of single and dual head stretch forming machines of the AFMR series.These machines are capable of stretch forming either soldered or welded can bodies. The final shape of the can is determined by the tools which are build for the machine: rectangular, oval, mandolin shaped, square with rounded ends or virtually any other shape within the limitations of the material used.
Specifications:

90/min till 180/min

45mm till 130mm

50mm till 400mm

up to 0.4mm
Functions:

Expanding

Seam locating
DFS 125
This automatic flanger and double seamer is used for the production of round cans of all kinds. Following designs are available:
- automatic flanger – bottom seamer
- spin flanger – bottom seamer
- roller flanger – necker – bottom seamer
- curler and/or bottom seamer
Specifications:

120/min

35mm till 130mm

50mm till 400mm

up to 0.4mm
Functions:

Die flanging

Spin flanging

Roller flanging

Necking

Curling

Seaming


SBA 200
The fully automatic SBA 200 is a double-end body flanger designed to handle rectangular and irregular, as well as round and cone-shaped can bodies. The machine can be set up for welded, soldered, or locked side seams. A variable motor drive allows adjustment to suit a wide range of can body shapes and line speeds. Squeeze flanging eliminates buckling of the can bodies and over-flanging on the corners. This makes the unit especially suitable for tall and thin can bodies. In addition, the radius of the flange can be easily selected, ensuring an optimal seam with the can ends.
Specifications:

100/min

55mm till 230mm

45 x 45mm till 170 x 170mm

45mm till 400mm

up to 0.4mm
Functions:

Squeeze flanging
VA 171
The machine seams irregular and round cans and containers of all kinds and is particularly suitable for seaming bottom and top ends onto square and rectangular containers. The machine is fitted with two 4-roller seaming heads, one for the first and one for the second seaming operation. The table height is fixed whereas the seaming top can be adjusted by the gear motor to the respective container height The output is infinitely variable enabling adaption to the container shape and size.
Specifications:

100/min

60mm till 260mm

45 x 45mm till 195 x 195mm

45mm till 410mm

up to 0.4mm
Functions:

Seaming


VA 420 / VA 420-D
The machine seams irregular and round cans and containers of all kinds and is particularly suitable for seaming bottom and top ends onto square and rectangular containers. The machine is fitted with two 6-roller seaming heads, one for the first and one for the second seaming operation. The table height is fixed whereas the seaming top can be adjusted by the gear motor to the respective container height. The output is infinitely variable enabling adaption to the container shape and size.
Specifications:

60/min

150mm till 420mm

120 x 120mm till 330 x 330mm

45mm till 500mm

up to 0.4mm
Vorteile

Seaming

Triple seaming
VA 457
The machine seams cans of all kinds. A bottom/lid is seamed onto a stationary can. For the first and the second seaming operation, a 4 roller-seaming head system is used. Table height is constant whereas the seaming top can be adjusted by a servomotor to the respective can height. Output is variable, enabling adaption to can shape and size.
Specifications:

30/min till 40/min

150mm till 330mm
80mm till 420mm

120 x 120mm till 330 x 330mm

80mm till 500mm

up to 0.4mm
Vorteile

Seaming

Triple seaming
