Shaped cans small
Machines
SFM1/11
The machine has been developed to meet the ever growing demand for higher production output for expanded can bodies. It is based on the same principle as our well-known and proven types of single- and double-headed expansion machines of the AFMR series. The SFM can process both longitudinally welded and brazed hulls. In each case, the shape is determined by the expanding tool used on the machine. The fuselage cross-section can be rectangular, oval, mandolin-shaped, square with round ends, or can be given any other shape that is within the sheet metal’s formability range.
Specifications:
90/min till 180/min
45mm till 130mm
50mm till 400mm
up to 0.4mm
Functions:
Stretching
Seam locating
DFS 125
The machine is used for double-sided flanging and single-sided sealing of round cans of all types. The following versions are available:
- automatic flanger-bottom seamer
- spin flanger-bottom seamer
- roller flanger-necker-bottom seamer
- curler and/or bottom seamer
Specifications:
120/min
35mm till 130mm
50mm till 400mm
up to 0.4mm
Functions:
Die flanging
Spin flanging
Roller flanging
Necking
Curling
Seaming
SBA 200
The machine flanges cylindrical and conical can bodies of any shape on both sides using the slide flanging method. The advantage of this method is that small hull plate thicknesses and large hull heights can be processed without the risk of hull buckling or overrolling of the flanging in the radius area.
Specifications:
100/min
55mm till 230mm
45 x 45mm till 170 x 170mm
45mm till 400mm
up to 0.4mm
Functions:
Squeeze flanging
VA 171
The machine seams non-round and round cans and containers of various types and is mainly used for seaming the bottoms and lids in canister production It operates with one four-roller seaming head each for the first and second seaming operation. The table height is constant, and the seaming head can be adjusted to the respective canister height by means of a servomotor.
Specifications:
100/min
60mm till 260mm
45 x 45mm till 195 x 195mm
45mm till 410mm
up to 0.4mm
Functions:
Seaming
VA 420 / VA 420-D
The machine seams non-round and round cans and containers of various types and is mainly used for seaming the bottoms and lids in canister production. It works with one six-roller seaming head each for the first and second seaming operation. The table height is constant, and the seaming head can be adjusted to the respective canister height by the servomotor.
Specifications:
60/min
150mm till 420mm
120 x 120mm till 330 x 330mm
45mm till 500mm
up to 0.4mm
Vorteile
Seaming
Triple seaming
VA 457
The machine seams cans of all types. The seaming process takes place with the can stationary. It operates with a four-roller seaming head for the first and second seaming operation The table height is constant and the seaming top is adjustable to the respective can height by means of a servomotor.
Specifications:
30/min till 40/min
150mm till 330mm
80mm till 420mm
120 x 120mm till 330 x 330mm
80mm till 500mm
up to 0.4mm
Vorteile
Seaming
Triple seaming
